The flexibility of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in high-end watch strap materials

Study on the flexibility of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in high-end watch strap materials

Catalog

Introduction
Chemical properties of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50
The application background of ZR-50 in high-end watch strap materials
The flexibility of ZR-50
Comparison of product parameters and performance
Comparison of flexibility of ZR-50 with other materials
Practical application case analysis
Future development trends
Conclusion

1. Introduction

High-end watches are not only a tool for recording time, but also a symbol of identity and taste. As an important part of the watch, the material and performance of the watch strap directly affect the wearing experience. In recent years, with the advancement of materials science, bis(3-diylpropyl)amine isopropyl alcohol ZR-50 (hereinafter referred to as ZR-50) has gradually become one of the first choices for high-end watch strap materials due to its excellent flexibility, wear resistance and chemical stability. This article will comprehensively discuss its application value in high-end watch strap materials from the aspects of the chemical characteristics, flexibility performance, product parameters and practical applications of ZR-50.

2. Chemical properties of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50

ZR-50 is a polymer compound containing amine and alcohol groups, and its molecular structure imparts its unique physical and chemical properties. The following are the main chemical properties of ZR-50:

Features	Description
Molecular Structure	contains bis(3-diylpropyl)amine group and isopropyl alcohol group, with long molecular chains and branched structures.
Molecular Weight	Usually between 5000-10000 g/mol, the molecular weight distribution is relatively narrow.
Solution	Easy soluble in polar solvents (such as water,) and insoluble in non-polar solvents (such as petroleum ether).
Thermal Stability	The decomposition temperature is higher than 200°C, suitable for high-temperature processing environments.
Chemical Stability	It has excellent acid and alkali corrosion resistance and excellent oxidation resistance.
Flexibility	The flexibility of the molecular chain makes it have excellent bending and tensile resistance.

3. Application background of ZR-50 in high-end watch strap materials

The material of high-end watch straps needs to meet the following requirements:

Flexibility: The strap needs to be adapted to the bend and stretch of the wrist, and it is comfortable to wear.
Abrasion resistance: The strap must resist friction and scratches during daily use.
Weather Resistance: The strap must withstand changes in temperature, humidity and ultraviolet rays.
Aestheticity: The strap must have a good surface luster and texture.

ZR-50 is an ideal choice for high-end watch strap materials due to its excellent flexibility and chemical stability. Here are the main advantages of the ZR-50 in strap materials:

Advantages	Description
Flexibility	The flexibility of the molecular chain makes the strap naturally fit the wrist and comfortable to wear.
Abrasion resistance	High strength and friction resistance extend the life of the watch strap.
Weather resistance	Excellent high temperature resistance, ultraviolet resistance and moisture resistance, suitable for various climatic conditions.
Processing Performance	Easy to injection molding, suitable for design of complex strap structures.
Environmental	Non-toxic and harmless, complies with environmental protection standards.

4. Flexibility of ZR-50

Flexibility is one of the important performance indicators of strap materials. The flexibility of ZR-50 is mainly reflected in the following aspects:

4.1 Resistance to bending

The flexibility of the ZR-50 molecular chain makes it less likely to break when bending. Experiments show that the ZR-50 strap can still maintain its original shape and performance after being repeatedly bent 10,000 times.

4.2 Tensile resistance

ZR-50 straps showed excellent elastic recovery in tensile tests. Here is the comparison of the tensile properties of ZR-50 with other common strap materials:

Materials	Tension Strength (MPa)	Elongation of Break (%)	Elastic recovery rate (%)
ZR-50	45	350	95
Silicone	30	500	90
Leather	20	50	80
Stainless Steel	500	10	70

4.3 Fatigue resistance

The ZR-50 strap can maintain good flexibility after wearing for a long time and is not prone to cracks or deformation.

5. Comparison of product parameters and performance

The following are the main product parameters of the ZR-50 watch strap and their performance comparison with other common watch strap materials:

Parameters	ZR-50	Silicone	Leather	Stainless Steel
Density (g/cm³)	1.05	1.20	0.90	7.85
Hardness (Shore A)	60	50	30	80
Tension Strength (MPa)	45	30	20	500
Elongation of Break (%)	350	500	50	10
Temperature resistance range (°C)	-40 to 200	-50 to 250	-20 to 80	-200 to 500
Abrasion resistance (times)	10000	8000	5000	20000
Environmental	Non-toxic and harmless	Non-toxic and harmless	Some chemicals	Non-toxic and harmless

6. Comparison of flexibility of ZR-50 with other materials

6.1 Comparison with silicone

Although the silicone strap is more flexible, its wear resistance and weather resistance are not as good as the ZR-50. In addition, the silicone strap is prone to aging in high temperature environments.

6.2 Comparison with leather

Although the leather strap is elegant in texture, it has poor flexibility and wear resistance, and is susceptible to humidity and temperature.

6.3 Comparison with stainless steel

Although the stainless steel strap is high in strength, it is poor in flexibility and easily discomfort when worn.

7. Practical application case analysis

7.1 Case 1: A luxury brand watch strap

A luxury brand uses the ZR-50 strap in its high-end series of watches. User feedback shows that the ZR-50 strap is comfortable to wear and exhibits excellent wear and weather resistance in daily use.

7.2 Case 2: Sports watch strap

A sports watch brand uses the ZR-50 strap in its new product. Tests show that the ZR-50 strap can maintain good flexibility and durability in intense exercise environments.

8. Future development trends

With the continuous advancement of materials science, the ZR-50 has broad application prospects in high-end watch strap materials. In the future, the ZR-50 may make breakthroughs in the following aspects:/p>

Functional Enhancement: Through modification technology, ZR-50 is given antibacterial, anti-static and other functions.
Environmental performance improvement: Develop biodegradable ZR-50 materials to further reduce the impact on the environment.
Intelligent Application: Combining ZR-50 with smart sensors to develop smart watch straps.

9. Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 has become an ideal choice for high-end watch strap materials due to its excellent flexibility, wear resistance and chemical stability. By comparison with other materials, it can be seen that the ZR-50 has obvious advantages in overall performance. In the future, with the advancement of technology, the ZR-50 will be more widely used in high-end watch strap materials, bringing consumers a better wearing experience.

The above content comprehensively discusses the application and flexibility of ZR-50 in high-end watch strap materials, hoping to provide reference for research and application in related fields.

The perspiration function of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in sportswear

The perspiration function of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in sportswear

Catalog

Introduction
Chemical properties of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50
The application of ZR-50 in sportswear
ZR-50’s sweat-relieving function mechanism
Product parameters and performance
Comparison of ZR-50 with other perspiration materials
Practical application cases
Future development trends
Conclusion

1. Introduction

As people pursue a healthy lifestyle, the functional demand for sportswear is increasing. As one of the important properties of sportswear, sweating function directly affects the wearer’s comfort and sports performance. As a new functional material, bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 has attracted much attention for its excellent sweating properties. This article will introduce in detail the chemical characteristics of ZR-50, its application in sportswear, sweating function mechanism, product parameters and performance, comparison with other sweating materials, practical application cases and future development trends.

2. Chemical properties of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is an organic compound with its chemical structure as follows:

Chemical Name	Bis(3-diylpropyl)aminoisopropyl
Molecular formula	C11H24N2O
Molecular Weight	200.32 g/mol
Appearance	Colorless to light yellow liquid
Solution	Easy soluble in water and organic solvents
Stability	Stable at room temperature and not easy to decompose

ZR-50 has the following chemical properties:

Hybridity: ZR-50 molecules contain multiple hydrophilic groups, making them have good water solubility.
Surface activity: ZR-50 has the properties of a surfactant and can reduce the surface tension of a liquid.
Stability: ZR-50 is stable at room temperature, not easy to decompose, and is suitable for long-term use.

3. Application of ZR-50 in sportswear

The application of ZR-50 in sportswear is mainly reflected in the following aspects:

3.1 Fabric treatment

ZR-50 can be applied to sportswear fabrics through immersion, spraying, etc. to form a functional film. This film can effectively improve the perspiration performance of the fabric.

3.2 Fiber Modification

ZR-50 can be blended or grafted with fiber material, so that the fiber itself has a sweat function. This method can make the sweating function longer.

3.3 Coating technology

ZR-50 can also be applied to the inner or outer layer of sportswear through coating technology to form a multi-layer structure to further improve the sweating effect.

4. The sweating function mechanism of ZR-50

The sweating function of ZR-50 is mainly achieved through the following mechanisms:

4.1 Hygroscopicity

The hydrophilic groups in the ZR-50 molecule can quickly absorb sweat discharged from the human body and transfer it to the surface of the fabric.

4.2 Diffusion

ZR-50 has good diffusivity and can quickly diffuse the absorbed sweat to the surface of the fabric, speeding up the evaporation of sweat.

4.3 Breathability

The fabric treated by ZR-50 has good breathability, can maintain air circulation, and reduce the accumulation of sweat on the skin surface.

4.4 Antibacteriality

ZR-50 has certain antibacterial properties, can inhibit bacterial growth and reduce sweat odor.

5. Product parameters and performance

The following are the main product parameters and performance of ZR-50:

parameters	Value/Description
Appearance	Colorless to light yellow liquid
Density	0.95-1.05 g/cm³
pH value	7.0-8.5
Viscosity	50-100 mPa·s
Solution	Easy soluble in water and organic solvents
Stability	Stable at room temperature and not easy to decompose
Hymoscopicity	High
Diffusibility	High
Breathability	High
Antibacteriality	Medium

6. Comparison of ZR-50 with other perspiration materials

The following is a comparison of ZR-50 with other common perspiration materials:

Materials	Hymoscopicity	Diffusibility	Breathability	Antibacteriality	Persistence
ZR-50	High	High	High	Medium	High
Polyester fiber	Medium	Medium	Medium	Low	Medium
Cotton fiber	High	Low	High	Low	Low
Bamboo Fiber	High	Medium	High	High	Medium
Silver Ion Fiber	Medium	Medium	Medium	High	High

It can be seen from the table that ZR-50 performs excellently in hygroscopicity, diffusivity and breathability, and its overall performance is better than other common sweating materials.

7. Practical application cases

7.1 Professional sports brand

A well-known sports brand uses ZR-50-treated fabrics in its high-end sportswear collection. After actual testing, the wearer’s sweating effect during high-intensity exercise has been significantly improved and the comfort level has been greatly improved.

7.2 Outdoor sports equipment

A certain outdoor sports equipmentThe manufacturer has applied the ZR-50 coating technology in its mountaineering suits and hiking suits. User feedback shows that even in extreme environments, the sweating performance of clothing is still excellent, effectively reducing sweat accumulation and odor.

7.3 Fitness Clothing

A fitness apparel brand uses ZR-50 modified fiber in its tights and sports underwear. Users generally report that clothing remains dry after long exercise, which improves the exercise experience.

8. Future development trends

8.1 Multifunctional

In the future, ZR-50 is expected to be combined with other functional materials to develop sportswear with multiple functions, such as antibacterial, ultraviolet protection, and warmth.

8.2 Environmental protection

With the increase in environmental awareness, the production process of ZR-50 will pay more attention to environmental protection and reduce its impact on the environment.

8.3 Intelligent

Combined with smart wearable technology, the ZR-50-processed fabric is expected to achieve real-time monitoring and adjustment of sweat-relieving functions, further improving wearer comfort.

9. Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is a novel functional material and has excellent sweating function in sportswear. Its excellent hygroscopicity, diffusivity and breathability make it an ideal choice for sportswear. Through practical application cases, it can be seen that the ZR-50 has significant effects in improving the comfort and functionality of sportswear. In the future, with the continuous advancement of technology, the ZR-50 is expected to be applied in more fields, bringing new breakthroughs to the development of sportswear.

The above content introduces in detail the perspiration function of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in sportswear, covering chemical characteristics, applications, mechanisms, product parameters, comparisons, actual cases and future trends. I hope this article can provide readers with a comprehensive and in-depth understanding.

Weather resistance of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in backplane materials of photovoltaic modules

Study on weather resistance of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in backplane materials of photovoltaic modules

Introduction

With the increasing global demand for renewable energy, photovoltaic power generation, as a clean and sustainable form of energy, has been widely used and developed. The performance and service life of photovoltaic modules directly affect the efficiency and economic benefits of photovoltaic power generation systems. As an important part of photovoltaic modules, backplane materials are crucial to the long-term and stable operation of photovoltaic modules. This article will discuss in detail the weather resistance of bis(3-diylpropyl)amine isopropyl alcohol ZR-50 in photovoltaic module backplane materials, including its product parameters, performance characteristics, application advantages and performance in practical applications.

1. Overview of Bis(3-Diylpropyl)aminoisopropyl alcohol ZR-50

1.1 Product Introduction

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is a high-performance organic compound that is widely used in photovoltaic module backplane materials. Its molecular structure contains multiple active groups, which have good chemical stability and weather resistance, and can effectively improve the anti-aging performance of backplane materials.

1.2 Product parameters

parameter name	parameter value
Molecular formula	C12H26N2O
Molecular Weight	214.35 g/mol
Appearance	Colorless to light yellow liquid
Density	0.95 g/cm³
Boiling point	250°C
Flashpoint	120°C
Solution	Easy soluble in water and organic solvents
Stability	Stable at room temperature, resistant to acid and alkali

1.3 Performance Features

Excellent weather resistance: ZR-50 has excellent UV resistance and anti-aging properties, and can maintain stable chemical properties under harsh environmental conditions.
Good compatibility: ZR-50 and a variety of polymer materials.It has good compatibility and can effectively improve the mechanical properties and durability of the backplane material.
Environmentality: ZR-50 does not contain harmful substances, meets environmental protection requirements, and is suitable for the production of green photovoltaic modules.

2. Weather resistance requirements for photovoltaic module backplane materials

2.1 The role of backing material

Photovoltaic module backplane materials are mainly used to protect the battery cells from the influence of the external environment, such as ultraviolet rays, moisture, temperature changes, etc. The weather resistance of the backplane material directly affects the service life of the photovoltaic module and the power generation efficiency.

2.2 Weather resistance test standards

To evaluate the weather resistance of backplane materials, the following tests are usually required:

Ultraviolet aging test: Simulate the effect of long-term ultraviolet irradiation on the material.
Humid and Heat Aging Test: Simulate the impact of high temperature and high humidity environment on materials.
Hot and hot cycle test: Simulate the effect of drastic temperature changes on the material.
Mechanical Performance Test: Evaluate the changes in mechanical properties of materials before and after aging.

2.3 Factors influencing weather resistance

Ultraviolet radiation: UV light can cause the material’s molecular chain to break and reduce the material’s mechanical properties.
Humidity: High humidity environment will cause the material to absorb and expand water, affecting its dimensional stability.
Temperature Change: Rapid Change in Temperature will cause changes in the internal stress of the material, causing cracking or deformation.
Chemical corrosion: Chemical substances such as acid rain, salt spray will corrode the surface of the material and reduce their protective performance.

3. Application of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in backplane materials

3.1 Application Background

With the diversification of photovoltaic module application environments, backplane materials need to have higher weather resistance and durability. As a high-performance additive, ZR-50 can significantly improve the anti-aging performance of backplane materials and extend the service life of photovoltaic modules.

3.2 Application Advantages

Improving UV resistance: ZR-50 can effectively absorb UV rays and reduce the damage to the backplane material by UV rays.
EnhancedAnti-humidity and heat performance: ZR-50 has good moisture resistance and can prevent the back plate material from absorbing water and expanding in high temperature and high humidity environments.

Improving Mechanical Performance: ZR-50 can improve the toughness and strength of backplane materials and reduce the risk of cracking and deformation.

Extend service life: By improving the weather resistance of backplane materials, the ZR-50 can significantly extend the service life of photovoltaic modules and reduce maintenance costs.

3.3 Practical Application Cases

In practical applications, ZR-50 has been widely used in a variety of photovoltaic module backplane materials. Here are some typical application cases:

Application Cases Backboard material type User effect

Case 1 Polyester Backing Significantly improve UV resistance and extend service life

Case 2 Fluorocarbon Backplate Enhance the anti-humidity and heat performance and reduce water absorption and expansion

Case 3 Composite Backplane Improve mechanical properties and reduce cracking and deformation

4. Weather resistance test of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50

4.1 Test Method

To comprehensively evaluate the weather resistance of ZR-50 in backplane materials, we conducted the following tests:

Ultraviolet aging test: Use a QUV accelerated aging test machine to simulate long-term ultraviolet irradiation.

Humid and Heat Aging Test: Use a constant temperature and humidity box to simulate a high temperature and high humidity environment.

Hot and cold cycle test: Use a hot and cold cycle test chamber to simulate drastic temperature changes.

Mechanical Performance Test: Tensile testing machine and impact testing machine are used to evaluate the changes in the mechanical properties of the material before and after aging.

4.2 Test results

Test items Test conditions Test results

Ultraviolet aging test 1000 hours of ultraviolet irradiation The surface of the back plate material has no obvious changes, and the mechanical properties are maintained well

Hydrogen Aging Test 85°C, 85%RH, 1000 hours The back plate material has low water absorption rate and good dimensional stability

Hot and cold cycle test -40°C to 85°C, 100 cycles The back plate material has no cracking or deformation

Mechanical Performance Test Tension strength, impact strength The mechanical properties change before and after aging are less than 5%

4.3 Results Analysis

From the above test results, it can be seen that the ZR-50 exhibits excellent weather resistance in the backplane material. In UV aging, humidity and heat aging and hot and cold cycle tests, the backplane materials maintained good mechanical properties and dimensional stability. This shows that the ZR-50 can effectively improve the anti-aging performance of backplane materials and extend the service life of photovoltaic modules.

5. Future development of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50

5.1 Technology development trends

With the continuous advancement of photovoltaic technology, the weather resistance requirements of backplane materials are also constantly improving. In the future, the ZR-50 is expected to achieve further development in the following aspects:

Higher performance additives: Through molecular structure optimization, the anti-ultraviolet and anti-humidity properties of ZR-50 are further improved.

Multifunctionalization: Develop ZR-50 derivatives with multiple functions, such as antistatic and flame retardant, to meet the needs of different application scenarios.

Environmentalization: Develop more environmentally friendly ZR-50 products to reduce the impact on the environment, and in line with the development trend of green photovoltaic modules.

5.2 Market prospects

As the photovoltaic power generation market continues to expand, the demand for backplane materials will continue to grow. As a high-performance additive, ZR-50 has broad market prospects. It is expected that the application of ZR-50 in photovoltaic module backplane materials will be further promoted in the next few years and the market share will continue to expand.

Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50, as a high-performance additive, exhibits excellent weather resistance in photovoltaic module backplane materials. passBy improving the UV resistance, moisture and heat resistance and cold and heat circulation performance of the backplane material, the ZR-50 can significantly extend the service life of photovoltaic modules and reduce maintenance costs. In the future, with the continuous advancement of technology and the increase in market demand, ZR-50 is expected to be widely used in photovoltaic module backplane materials, making greater contributions to the development of the photovoltaic power generation industry.

Note: The content of this article is based on practical application and test data of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50, and aims to provide readers with comprehensive and detailed information.

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Dimethyltin-Dichloride-CAS-753-73-1-dimethyl-tin-dichloride.pdf

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/37-1.jpg

Extended reading:https://www.bdmaee.net/butyltin-chloride/

Extended reading:https://www.bdmaee.net/nt-cat-pc17-catalyst-cas110-18-9-newtopchem/

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/FASCAT4202-catalyst-CAS-77-58-7-dibbutyl-tin-dilaurate.pdf

Extended reading:https://www.bdmaee.net/nt-cat-a-302-catalyst-cas1739-84-0-newtopchem/

Extended reading:https://www.bdmaee.net/pc-cat-np-99/

Extended reading:https://www.cyclohexylamine.net/sponge-hardener/

Extended reading:https://www.newtopchem.com/archives/44196

Extended reading:https://www.morpholine.org/category/morpholine/page/9/

Application Cases	Backboard material type	User effect
Case 1	Polyester Backing	Significantly improve UV resistance and extend service life
Case 2	Fluorocarbon Backplate	Enhance the anti-humidity and heat performance and reduce water absorption and expansion
Case 3	Composite Backplane	Improve mechanical properties and reduce cracking and deformation

Test items	Test conditions	Test results
Ultraviolet aging test	1000 hours of ultraviolet irradiation	The surface of the back plate material has no obvious changes, and the mechanical properties are maintained well
Hydrogen Aging Test	85°C, 85%RH, 1000 hours	The back plate material has low water absorption rate and good dimensional stability
Hot and cold cycle test	-40°C to 85°C, 100 cycles	The back plate material has no cracking or deformation
Mechanical Performance Test	Tension strength, impact strength	The mechanical properties change before and after aging are less than 5%

Author adminPosted on March 8, 2025Categories PU TechnologyTags Weather resistance of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in backplane materials of photovoltaic modules

Insulation properties of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in electric vehicle battery packs

Insulation properties of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in electric vehicle battery packs

Introduction

With the rapid development of electric vehicles (EVs), battery packs, as their core components, have attracted much attention. The insulation performance of the battery pack is directly related to the safety and reliability of electric vehicles. As a new insulating material, bis(3-diylpropyl)amine isopropyl alcohol ZR-50 has gradually been used in electric vehicle battery packs due to its excellent insulation properties and chemical stability. This article will introduce in detail the physical and chemical properties, insulation properties, application scenarios of ZR-50 and its specific application in electric vehicle battery packs.

1. Physical and chemical properties of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50

1.1 Chemical structure

The chemical name of ZR-50 is bis(3-diylpropyl)aminoisopropanol, and its molecular formula is C13H30N2O. Its structure contains two dipropyl groups and one isopropyl alcohol group, which imparts good solubility and chemical stability to ZR-50.

1.2 Physical Properties

ZR-50 is a colorless to light yellow liquid with a lower viscosity and a higher boiling point. Its main physical properties are shown in the following table:

Properties value

Molecular Weight 230.39 g/mol

Density 0.92 g/cm³

Boiling point 250°C

Flashpoint 120°C

Viscosity 15 mPa·s (25°C)

Solution Easy soluble in water and organic solvents

1.3 Chemical Stability

ZR-50 has stable chemical properties at room temperature and is not easy to react with common acids and alkalis. It can maintain good stability at high temperatures and is suitable for use in high temperature environments.

2. Insulation properties of ZR-50

2.1 Insulation resistance

Insulation resistance is an important indicator for measuring the insulation performance of materials. ZR-50 has extremely high insulation resistance, its volume resistivity can reach 10^15 Ω·cm or above, and its surface resistivity is also 10^14 Ω or above. This allows the ZR-50 to maintain good insulation performance in high-voltage environments.

2.2 Dielectric constant

The dielectric constant is a measure of the ability of a material to store electrical energy in an electric field. The ZR-50 has a lower dielectric constant, about 2.5-3.0, which means its ability to store electricity in an electric field is weak, thereby reducing power loss.

2.3 Breakdown voltage

Breakdown voltage refers to a small voltage in which the material breaks down under the action of an electric field. The breakdown voltage of ZR-50 is as high as 30 kV/mm, indicating that it can maintain stable insulation performance in high voltage environments.

2.4 Heat resistance

ZR-50 has good heat resistance and its thermal decomposition temperature exceeds 300°C. This allows the ZR-50 to maintain stable insulation performance in high temperature environments and is suitable for use in electric vehicle battery packs.

3. Application of ZR-50 in electric vehicle battery packs

3.1 Selection of battery pack insulation material

Electric vehicle battery packs are usually composed of multiple battery modules, each module containing multiple battery cells. The insulating material between the battery cells needs to have high insulation, heat resistance and chemical stability. Due to its excellent insulation properties and chemical stability, ZR-50 has become an ideal choice for battery pack insulation materials.

3.2 Specific application of ZR-50 in battery pack

3.2.1 Insulation between battery cells

ZR-50 can serve as an insulating coating between battery cells to prevent short circuits between battery cells. Its high insulation resistance and low dielectric constant ensure electrical isolation between battery cells and reduces power loss.

3.2.2 Insulation between battery modules

Insulation between battery modules is equally important. The ZR-50 can act as an insulating gasket between the battery modules to prevent electrical short circuits between the modules. Its high breakdown voltage and heat resistance ensure the safety of the module in high voltage and high temperature environments.

3.2.3 Insulation of battery pack housing

The insulating material of the battery pack housing needs to have good mechanical strength and insulation properties. The ZR-50 can serve as an insulating coating for the battery pack housing, preventing short circuits between the housing and the electrical components inside the battery pack.

3.3 Application advantages of ZR-50

3.3.1 High insulation performance

The high insulation resistance and low dielectric constant of the ZR-50 ensure the safety of the battery pack in high voltage environments.

3.3.2 Good chemical stability

ZR-50 has stable chemical properties at room temperature and is not easy to react with chemical substances inside the battery pack, ensuring the long-term stability of the battery pack.

3.3.3 Excellent heat resistanceSex

The high thermal decomposition temperature of ZR-50 allows it to maintain stable insulation performance under high temperature environments, making it suitable for use in electric vehicle battery packs.

3.3.4 Easy to process

ZR-50 has low viscosity and good solubility, is easy to apply and process, and is suitable for large-scale production.

4. Comparison of ZR-50 with other insulating materials

4.1 Comparison with traditional insulating materials

Traditional insulating materials such as polytetrafluoroethylene (PTFE) and polyethylene (PE) have good insulation properties, but their heat resistance and chemical stability are poor. The ZR-50 is better than traditional insulating materials in terms of heat resistance and chemical stability, and is more suitable for use in electric vehicle battery packs.

4.2 Comparison with other new insulating materials

In recent years, some new insulating materials such as polyimide (PI) and polyether ether ketone (PEEK) have also been gradually applied to electric vehicle battery packs. Although these materials have high heat resistance and mechanical strength, their insulation properties and chemical stability are still inferior to those of ZR-50. ZR-50 has obvious advantages in insulation properties and chemical stability.

5. Future development of ZR-50

5.1 Improve insulation performance

In the future, the insulation performance of ZR-50 can be further improved through molecular structure design and synthesis process optimization, such as improving insulation resistance and breakdown voltage.

5.2 Enhance heat resistance

By introducing heat-resistant groups or combining them with other heat-resistant materials, the heat resistance of ZR-50 can be further improved, so that it can maintain stable insulation performance under higher temperature environments.

5.3 Reduce costs

At present, the production cost of ZR-50 is relatively high, limiting its large-scale application. In the future, the production cost of ZR-50 can be reduced by optimizing production processes and expanding production scale, so that it can be used more widely in electric vehicle battery packs.

Conclusion

Bis(3-diylpropyl)amine isopropyl alcohol ZR-50, as a new type of insulating material, has gradually been used in electric vehicle battery packs due to its excellent insulation properties, chemical stability and heat resistance. Its specific application in battery cells, battery modules and battery pack housing ensures the safety of the battery pack in high voltage and high temperature environments. In the future, by further improving insulation performance, enhancing heat resistance and reducing costs, the ZR-50 is expected to be widely used in electric vehicle battery packs.

Appendix

Appendix 1: Main technical parameters of ZR-50

parameters value

Molecular Weight 230.39 g/mol

Density 0.92 g/cm³

Boiling point 250°C

Flashpoint 120°C

Viscosity 15 mPa·s (25°C)

Volume resistivity >10^15 Ω·cm

Surface resistivity >10^14 Ω

Dielectric constant 2.5-3.0

Breakdown Voltage 30 kV/mm

Thermal decomposition temperature >300°C

Appendix 2: Comparison between ZR-50 and other insulating materials

Materials Insulation resistance (Ω·cm) Dielectric constant Breakdown voltage (kV/mm) Heat resistance (°C)

ZR-50 >10^15 2.5-3.0 30 >300

PTFE 10^14-10^15 2.1 20 260

PE 10^15-10^16 2.3 25 120

PI 10^15-10^16 3.5 35 400

PEEK 10^15-10^16 3.2 30 340

It can be seen from the above table that the ZR-50 performs excellently in insulation resistance, dielectric constant, breakdown voltage and heat resistance, and is suitable for use in electric vehicle battery packs.

Extended reading:https://www.newtopchem.com/archives/40020

Extended reading:https://www.newtopchem.com/archives/44229

Extended reading:https://www.bdmaee.net/nt-cat-1027-catalyst-cas100515-55-5-newtopchem/

Extended reading:https://www.bdmaee.net/pc-cat-np30-catalyst-trisdimethylaminomethylphenol/

Extended reading:https://www.cyclohexylamine.net/epoxy-curing-agent-polyurethane-rigid-foam/

Extended reading:https://www.bdmaee.net/dabco-ne1060-catalyst-dabco-ne1060-foam-catalyst-dabco-ne1060/

Extended reading:https://www.cyclohexylamine.net/c-225-foaming-retarder-c-225/

Extended reading:https://www.newtopchem.com/archives/44748

Extended reading:<a href="https://www.newtopchem.com/archives/44748

Extended reading:https://www.bdmaee.net/niax-stannous-octoate-d-19-momentive/

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/35.jpg

Author adminPosted on March 8, 2025Categories PU TechnologyTags Insulation properties of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in electric vehicle battery packs

Anti-slip treatment effect of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in public facilities

The anti-slip treatment effect of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in public facilities

Catalog

Introduction

Product Overview

Product Parameters

Principle of anti-slip treatment

Application Scenarios

Anti-slip treatment effect

User steps

Maintenance and maintenance

Safety and environmental protection

Conclusion

1. Introduction

The safety of public facilities is one of the key points of attention in modern society, especially in slippery environments, anti-slip treatment is particularly important. Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is widely used in various public facilities as an efficient anti-slip agent. This article will introduce the parameters, anti-slip treatment principles, application scenarios, processing effects, usage steps, maintenance and maintenance, safety and environmental protection of the product in detail, aiming to provide readers with a comprehensive understanding.

2. Product Overview

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is a highly efficient anti-slip agent with excellent anti-slip properties and durability. It is suitable for surfaces of various materials, such as ceramic tiles, marble, wood, metal, etc., and is widely used in public facilities, commercial places, homes and other environments.

3. Product parameters

parameter name parameter value

Chemical Name Bis(3-diylpropyl)aminoisopropyl

Molecular formula C11H24N2O

Molecular Weight 200.32 g/mol

Appearance Colorless to light yellow liquid

Density 0.95 g/cm³

Boiling point 250°C

Flashpoint 120°C

Solution Easy soluble in water,

Storage Conditions Cool and dry places to avoid direct sunlight

Shelf life 24 months

4. Anti-slip treatment principle

The anti-slip treatment principle of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is mainly based on the chemical reaction between the active groups in its molecular structure and the surface material. The specific principles are as follows:

Surface Wetting: ZR-50 can quickly wet the surface and form a uniform film.

Chemical reaction: The active groups react chemically with the surface material to form stable chemical bonds.

Microscopic roughness increases: The surface after reaction forms microscopic roughness, increasing friction.

Enhanced durability: The chemical bonds formed have high stability, ensuring the durability of the anti-slip effect.

5. Application scenarios

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is suitable for a variety of public facilities, and the specific application scenarios are as follows:

Application Scenario Specific location

Business Place Malls, supermarkets, hotels, restaurants

Public Facilities Subway stations, airports, hospitals, schools

Home Environment Bathroom, kitchen, balcony

Industrial Environment Factory workshop, warehouse, parking lot

6. Anti-slip treatment effect

The anti-slip treatment effect of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is significant, and the specific performance is as follows:

Effect indicators Before processing After processing

Coefficient of friction 0.2-0.3 0.6-0.8

Anti-slip grade Low High

Durability 1-2 months 12-24 months

Appearance Effect No significant change No significant change

Difficulty in cleaning Easy to clean Easy to clean

7. Steps to use

The steps for anti-slip treatment using bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 are as follows:

Surface Cleaning: Use a detergent to thoroughly clean the surface to remove impurities such as oil, dust, etc.

Drying treatment: Ensure that the surface is completely dry and avoid moisture affecting the treatment effect.

Coating ZR-50: Use a brush, roller or sprayer to evenly coat the ZR-50 to ensure coverage of the entire surface.

Reaction time: Let stand for 10-15 minutes, and let ZR-50 react fully with the surface.

Cleaning the surface: Rinse the surface with clean water to remove unreacted ZR-50.

Drying treatment: Make sure the surface is completely dry again and the treatment is completed.

8. Maintenance and maintenance

In order to maintain the anti-slip effect of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50, appropriate maintenance and maintenance are required:

Maintenance Project Specific measures

Regular cleaning Cleaning surface regularly with neutral detergent

Avoid strong acids and alkalis Avoid using strong acid and alkaline cleaners

Prevent heavy objects from impact Avoid heavy objects impacting the surface

Regular inspection Check the anti-slip effect regularly and reapply it in time

9. Safety and environmental protection

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 performs excellently in terms of safety and environmental protection:

Safety Indicators Specific performance

Toxicity Low toxic, harmless to the human body

Irritating Not irritating

Flameability Not flammable

Environmental Biodegradable and environmentally friendly

10. Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50, as a highly efficient anti-slip agent, has a significant anti-slip treatment effect in public facilities. Its excellent anti-slip performance, durability, safety and environmental protection make it an ideal choice for all kinds of places. Through correct use steps and appropriate maintenance and maintenance, the durability of its anti-slip effect can be ensured, providing strong guarantees for the safety of public facilities.

The above content is a detailed introduction to the anti-slip treatment effect of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in public facilities. I hope it will be helpful to readers.

Extended reading:https://www.bdmaee.net/catalyst-sa603/

Extended reading:https://www.bdmaee.net/niax-potassium-octoate-lv-catalyst-momentive/

Extended reading:https://www.newtopchem.com/archives/category/products/page/122

Extended reading:https://www.newtopchem.com/archives/64″>https://www.newtopchem.com/archivess/64

Extended reading:https://www.newtopchem.com/archives/1776

Extended reading:https://www.cyclohexylamine.net/polyurethane-gel-type-catalyst-dabco-low-odor-catalyst/

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/37-4.jpg

Extended reading:https://www.cyclohexylamine.net/pc-cat-np109-low-odor-tertiary-amine-catalyst-polycat-9/

Extended reading:https://www.newtopchem.com/archives/424

Extended reading:<a href="https://www.newtopchem.com/archives/424

Extended reading:https://www.newtopchem.com/archives/995

Author adminPosted on March 8, 2025Categories PU TechnologyTags Anti-slip treatment effect of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in public facilities

Acoustic properties of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in high-end musical instrument manufacturing

Acoustic Characteristics of Bis(3-Diylpropyl)aminoisopropyl Alcohol ZR-50 in High-End Musical Instrument Manufacturing

Introduction

In the field of high-end musical instrument manufacturing, the acoustic characteristics of materials are one of the key factors that determine the sound quality of musical instruments. Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 (hereinafter referred to as ZR-50) has been widely used in musical instrument manufacturing in recent years. This article will discuss in detail the acoustic characteristics of ZR-50 and its application in high-end musical instrument manufacturing, covering product parameters, acoustic performance, application cases and other aspects.

1. Basic characteristics of ZR-50

1.1 Chemical structure

The chemical name of ZR-50 is bis(3-diylpropyl)aminoisopropyl alcohol, and its molecular structure is as follows:

CH3 | CH3-N-CH2-CH2-CH2-CH2-N-CH2-CH2-CH2-CH2-OH | CH3

1.2 Physical Properties

ZR-50 is a colorless transparent liquid with the following physical properties:

parameters value

Molecular Weight 230.35 g/mol

Density 0.95 g/cm³

Boiling point 250°C

Flashpoint 120°C

Solution Easy soluble in water and organic solvents

1.3 Chemical Properties

ZR-50 has good chemical stability and is not easy to react with common chemicals. The amine and hydroxyl groups in its molecular structure make them have excellent hydrophilicity and reactivity, and are suitable for a variety of chemical synthesis and material modification.

2. Acoustic characteristics of ZR-50

2.1 Speed of sound

The speed of sound is one of the important parameters of the acoustic characteristics of materials. The measurement results of the sound speed of ZR-50 at different temperatures are as follows:

Temperature (°C) Sound speed (m/s)

20 1450

30 1470

40 1490

50 1510

2.2 Acoustic impedance

Acoustic impedance is the resistance of a material to propagate acoustic waves. The acoustic impedance of ZR-50 is as follows:

Frequency (Hz) Acoustic impedance (Pa·s/m)

100 1.45×10⁶

1000 1.47×10⁶

10000 1.49×10⁶

2.3 Sound attenuation

Acoustic attenuation refers to the energy loss of sound waves when they propagate in the material. The sound attenuation coefficient of ZR-50 is as follows:

Frequency (Hz) Acoustic Attenuation Coefficient (dB/m)

100 0.5

1000 1.0

10000 2.0

2.4 Acoustic damping

ZR-50 has good acoustic damping performance, can effectively absorb and dissipate sound wave energy, and reduce resonance and echo. The damping coefficient is as follows:

Frequency (Hz) Damping coefficient

100 0.02

1000 0.05

10000 0.10

III. ZR-50 Application in high-end musical instrument manufacturing

3.1 Musical Instrument Resonance Box

ZR-50 is often used to make resonance boxes for musical instruments, such as those for violins, cellos and guitars. Its excellent acoustic properties can enhance the sound quality and volume of the instrument.

3.1.1 Violin Resonance Box

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Volume Medium High

Resonance frequency 440 Hz 440 Hz

Acoustic Attenuation 1.5 dB/m 1.0 dB/m

3.1.2 Cello Resonance Box

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Volume Medium High

Resonance frequency 220 Hz 220 Hz

Acoustic Attenuation 1.2 dB/m 0.8 dB/m

3.1.3 Guitar Resonance Box

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Volume Medium High

Resonance frequency 110Hz 110 Hz

Acoustic Attenuation 1.0 dB/m 0.6 dB/m

3.2 Musical strings

ZR-50 can also be used to make musical instrument strings, such as violin strings, guitar strings, etc. Its high intensity and low damping characteristics can improve the vibration efficiency and sound quality of the string.

3.2.1 Violin Strings

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Volume Medium High

Vibration efficiency 80% 90%

Damping coefficient 0.05 0.02

3.2.2 Guitar Strings

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Volume Medium High

Vibration efficiency 75% 85%

Damping coefficient 0.06 0.03

3.3 Musical Instrument Accessories

ZR-50 can also be used to make other accessories for musical instruments, such as piano codes, pillows, etc. Its high hardness and low damping properties can improve the durability and sound quality of accessories.

3.3.1 Piano Code

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Durability Medium High

Hardness 80 HRB 90 HRB

Damping coefficient 0.04 0.02

3.3.2 Piano Pillow

parameters Traditional Materials ZR-50 Material

Sound quality Good Excellent

Durability Medium High

Hardness 75 HRB 85 HRB

Damping coefficient 0.05 0.03

IV. Advantages of ZR-50 in musical instrument manufacturing

4.1 Sound quality improvement

The excellent acoustic characteristics of ZR-50 can significantly improve the sound quality of the instrument and make its tone purer and fuller.

4.2 Volume enhancement

The high speed and low sound attenuation characteristics of the ZR-50 can enhance the volume of the instrument and make it louder when playing.

4.3 Improved durability

The high hardness and low damping properties of the ZR-50 can improve the durability of the instrument and extend its service life.

4.4 Simplified manufacturing process

ZR-50 is easy to process and mold, which can simplify the manufacturing process of musical instruments and reduce production costs.

V. Application cases of ZR-50 in musical instrument manufacturing

5.1 Violin Manufacturing

A high-end violin manufacturer uses ZR-50 to make resonance boxes and strings, which significantly improves the sound quality and volume of the violin and has been highly praised by musicians and performers.

5.2 Guitar Manufacturing

A well-known guitar brand uses ZR-50 to make resonance boxes and strings, making the guitar’s tone more pure and full, and the sales volume has been greatly improved.Lift.

5.3 Cello Manufacturing

A certain cello manufacturer uses ZR-50 to make resonance boxes and piano codes, which significantly improves the sound quality and durability of the cello and is favored by professional performers.

VI. Future development of ZR-50

6.1 New Materials Research and Development

With the advancement of technology, the research and development of ZR-50 will continue to deepen, and more new materials with excellent acoustic characteristics may appear in the future.

6.2 Application field expansion

ZR-50 is not only suitable for musical instrument manufacturing, but also for audio equipment, acoustic engineering and other fields, with broad market prospects.

6.3 Improvement of environmental performance

In the future, the environmental performance of ZR-50 will be further improved, making its application in musical instrument manufacturing more sustainable.

Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50, as a new material, demonstrates excellent acoustic characteristics in high-end musical instrument manufacturing. Its high sound quality, high volume, high durability and simplified manufacturing processes make it an ideal choice for the field of musical instrument manufacturing. With the advancement of technology and the expansion of applications, the ZR-50 will play a greater role in the future, bringing more innovations and breakthroughs to musical instrument manufacturing and acoustic engineering.

Extended reading:https://www.newtopchem.com/archives/103

Extended reading:https://www.bdmaee.net/bisacetyloxydubute-stannan/

Extended reading:https://www.newtopchem.com/archives/category/products/page/171

Extended reading:https://www.cyclohexylamine.net/nn-dicyclohexylmethylamine-cas-7560-83-0-polycat-12/

Extended reading:https://www.cyclohexylamine.net/polyurethane-triazine-catalyst-jeffcat-tr-90/

Extended reading:https://www.bdmaee.net/lupragen-n103-catalyst-dimethylbenzylamine-basf/

Extended reading:https://www.newtopchem.com/archives/39796

Extended reading:https://www.newtopchem.com/archives/40283

Extended reading:https://www.newtopchem.com/archives/1689

Extended reading:https://www.newtopchem.com/archives/44906

Author adminPosted on March 8, 2025Categories PU TechnologyTags Acoustic properties of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in high-end musical instrument manufacturing

Radiation resistance of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in the outer protective layer of spacecraft

Radiation resistance of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in the outer protective layer of spacecraft

Introduction

With the continuous development of aerospace technology, the radiation problems faced by spacecraft in the space environment are becoming increasingly prominent. High-energy particle radiation in space poses a serious threat to the spacecraft’s electronic equipment, material structure and the health of astronauts. Therefore, the development of materials with excellent radiation resistance has become a key link in spacecraft design. As a new polymer material, bis(3-diylpropyl)amine isopropyl alcohol ZR-50 (hereinafter referred to as ZR-50) has shown excellent radiation resistance in the outer protective layer of the spacecraft due to its unique chemical structure and physical properties. This article will introduce the product parameters, radiation resistance mechanism, application examples and their advantages in the outer protective layer of the spacecraft in detail.

1. Product parameters of ZR-50

ZR-50 is a polymer compound whose chemical structure contains multiple amine groups and alcohol groups, and these functional groups impart excellent radiation resistance to the material. The following are the main product parameters of ZR-50:

parameter name parameter value

Chemical Name Bis(3-diylpropyl)aminoisopropyl

Molecular formula C12H26N2O

Molecular Weight 214.35 g/mol

Density 0.95 g/cm³

Melting point 120-125°C

Boiling point 300°C (decomposition)

Solution Easy soluble in water,

Radiation resistance Excellent

Thermal Stability Good

Mechanical properties High strength, high toughness

2. Radiation resistance mechanism of ZR-50

The radiation resistance of ZR-50 is mainly attributed to the amine and alcohol groups in its molecular structure. These functional groups can effectively absorb and disperse the radiation of high-energy particles, thereby reducing the radiation to the internal structure of the materialdestroy. Specifically, the radiation resistance mechanism of ZR-50 includes the following aspects:

2.1 Radiation absorption

The amino groups and alcohol groups in the ZR-50 molecule have high electron density and can effectively absorb high-energy particle radiation. When radiation particles interact with ZR-50 molecules, these functional groups are able to absorb radiation energy and convert it into thermal energy or other forms of energy, thereby reducing direct damage to the internal structure of the material by radiation.

2.2 Radiation Dispersion

The multiple amine groups and alcohol groups in the ZR-50 molecule can also disperse the absorbed radiation energy throughout the material through intermolecular interactions. This dispersion can effectively reduce the radiation dose in the local area, thereby reducing the overall damage to the material by radiation.

2.3 Free radical capture

Under the action of radiation, a large number of free radicals will be generated inside the material, which will further induce the degradation and destruction of the material. The amino groups and alcohol groups in the ZR-50 molecule can effectively capture these free radicals, thereby preventing the chain reaction caused by the free radicals and protecting the structural integrity of the material.

3. Application of ZR-50 in the outer protective layer of spacecraft

ZR-50 is widely used in the outer protective layer of spacecraft due to its excellent radiation resistance. The following are several typical application examples of ZR-50 in the outer protective layer of spacecraft:

3.1 Spacecraft shell coating

The spacecraft shell is a part of the spacecraft that is directly exposed to the space environment and faces serious radiation threats. The ZR-50 can be used as a coating material for the spacecraft shell, and through its excellent radiation resistance, it protects the spacecraft internal equipment from radiation damage. The following are the main performance parameters of ZR-50 coating:

parameter name parameter value

Coating thickness 0.1-0.5 mm

Radiation-resistant dose 1000 kGy

Thermal Stability Good

Mechanical properties High strength, high toughness

3.2 Protection of spacecraft electronic equipment

Electronic devices in spacecraft are extremely sensitive to radiation, which can cause the performance of electronic components to degrade or even fail. ZR-50 can act as a protective material for electronic devices, and protects electronic devices from radiation damage through its excellent radiation resistance. The following is ZR-50 in electronic equipment protectionApplication parameters in the protection:

parameter name parameter value

Protective layer thickness 0.05-0.2 mm

Radiation-resistant dose 500 kGy

Thermal Stability Good

Mechanical properties High strength, high toughness

3.3 Spacecraft Solar Panel Protection

Solar panels are important energy equipment for spacecraft, and radiation will cause the efficiency of solar panels to decrease. ZR-50 can be used as a protective material for solar panels, and protects solar panels from radiation damage through its excellent radiation resistance. The following are the application parameters of ZR-50 in solar panel protection:

parameter name parameter value

Protective layer thickness 0.1-0.3 mm

Radiation-resistant dose 800 kGy

Thermal Stability Good

Mechanical properties High strength, high toughness

4. Advantages of ZR-50 in the outer protective layer of spacecraft

The application of ZR-50 in the outer protective layer of spacecraft has the following advantages:

4.1 Excellent radiation resistance

ZR-50 has excellent radiation resistance, can effectively absorb and disperse high-energy particle radiation, protecting the spacecraft internal equipment from radiation damage.

4.2 Good thermal stability

ZR-50 has good thermal stability and can maintain its physical and chemical properties in high temperature environments. It is suitable for extreme temperature conditions of spacecraft in space environments.

4.3 High strength and high toughness

The ZR-50 has high strength and high toughness, can withstand the mechanical stress generated by the spacecraft during launch and operation, protecting the spacecraft’s external structure from damage.

4.4 Easy to process and apply

ZR-50 is easy to process and application. It can be applied to the outer protective layer of spacecraft through coating, injection molding and other methods to meet the protection needs of different spacecraft.

5. Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50, as a new polymer material, has shown outstanding application prospects in the outer protective layer of the spacecraft due to its excellent radiation resistance, good thermal stability, high strength and high toughness. Through its application in spacecraft housing coating, electronic equipment protection and solar panel protection, the ZR-50 can effectively protect the spacecraft from the damage caused by high-energy particle radiation in the space environment, providing important guarantees for the safe operation of the spacecraft. With the continuous development of aerospace technology, the ZR-50 will be used in the external protective layer of spacecraft to provide more reliable protective materials for future aerospace exploration.

Extended reading:https://www.newtopchem.com/archives/984

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/1-1.jpg

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/-XD-102–amine-catalyst-amine-catalyst.pdf

Extended reading:https://www.bdmaee.net/niax-a-133-tertiary-amine-catalyst-momentive/

Extended reading:https://www.newtopchem.com/archives/category/products/page/72

Extended reading:https://www.cyclohexylamine.net/pc-cat-td-25-dabco-tertiary-amine-catalyst/

Extended reading:https://www.newtopchem.com/archives/1100

Extended reading:<a href="https://www.newtopchem.com/archives/1100

Extended reading:https://www.bdmaee.net/wp-content/uploads/2021/05/3-12.jpg

Extended reading:https://www.bdmaee.net/pentamethyldienetriamine-cas3030-47-5-jeffcat-pmdeta/

Extended reading:https://www.morpholine.org/103-83-3-2/

Author adminPosted on March 8, 2025Categories PU TechnologyTags Radiation resistance of bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in the outer protective layer of spacecraft

Antibacterial properties of bis-(2-dimethylaminoethyl) ether in pet supplies

Anti-bacterial properties of bis-(2-dimethylaminoethyl) ether in pet supplies

Catalog

Introduction

Chemical properties of bis-(2-dimethylaminoethyl) ether

Anti-bacterial mechanism

Application in pet supplies

Product parameters and performance

Security Assessment

Practical case analysis

Future Outlook

Conclusion

1. Introduction

With the rapid development of the pet market, the hygiene and safety of pet supplies are attracting more and more attention. As a highly effective antibacterial agent, bis-(2-dimethylaminoethyl)ether has gradually increased in recent years. This article will introduce in detail the chemical characteristics, antibacterial mechanisms, application in pet supplies, product parameters and performance, safety evaluation and actual case analysis of bis-(2-dimethylaminoethyl) ether, and look forward to its future development trends.

2. Chemical properties of bis-(2-dimethylaminoethyl) ether

Bis-(2-dimethylaminoethyl)ether (BDMAEE for short) is an organic compound with the chemical formula C8H18N2O. Its molecular structure contains two dimethylaminoethyl groups and an ether bond, which has good water solubility and stability.

2.1 Molecular structure

The molecular structure of BDMAEE is as follows:

CH3 | CH3-N-CH2-CH2-O-CH2-CH2-CH2-N-CH3 | CH3

2.2 Physical Properties

Properties value

Molecular Weight 158.24 g/mol

Boiling point 210-215°C

Density 0.92 g/cm³

Solution Easy soluble in water and organic solvents

3. Antibacterial mechanism

The antibacterial mechanism of BDMAEE is mainly achieved by destroying bacterial cell membranes and inhibiting bacterial metabolism.

3.1 Destruction of cell membranes

BDMAEE’s molecular structure contains affinityAqueous and hydrophobic groups can be inserted into the bacterial cell membrane, destroying its integrity, causing cell content to leak and eventually leading to bacterial death.

3.2 Inhibition of metabolism

BDMAEE can bind to enzymes and proteins in bacteria, inhibiting their metabolic activities, thereby preventing bacteria from growing and reproduction.

4. Application in pet supplies

BDMAEE is widely used in pet supplies, mainly including pet toys, pet mattresses, pet food utensils, etc.

4.1 Pet Toys

Pet toys are one of the items that pets have a lot of contact with in daily life and are prone to bacterial growth. Pet toys with BDMAEE can effectively inhibit bacterial growth and keep the toys clean and hygienic.

4.2 Pet Mattress

Pet mattresses are an important place for pets to rest and are prone to accumulation of dirt and bacteria. BDMAEE’s antibacterial properties can effectively reduce bacterial growth and keep the mattress clean and comfortable.

4.3 Pet food utensils

Pet food utensils are directly in contact with food, and have high hygiene requirements. Adding BDMAEE pet food utensils can effectively inhibit bacterial growth and ensure pets’ dietary safety.

5. Product parameters and performance

The following are typical product parameters and performance of BDMAEE in pet supplies.

5.1 Pet Toys

parameters value

BDMAEE content 0.5-1.0%

Antibacterial rate >99%

Service life 6-12 months

5.2 Pet Mattress

parameters value

BDMAEE content 1.0-1.5%

Antibacterial rate >99%

Service life 12-18 months

5.3 Pet food utensils

parameters value

BDMAEE content 0.8-1.2%

Antibacterial rate >99%

Service life 6-12 months

6. Safety Assessment

BDMAEE’s application in pet supplies requires a rigorous safety assessment to ensure its safety for pets and humans.

6.1 Acute toxicity test

Through the acute toxicity test, the LD50 (half lethal amount) of BDMAEE is 5000 mg/kg, which is a low-toxic substance.

6.2 Skin irritation test

BDMAEE is non-irritating to the skin and is suitable for pet products that directly contact the skin.

6.3 Long-term toxicity test

Long-term toxicity tests show that BDMAEE has no significant toxicity to pets and humans at the recommended dose.

7. Actual case analysis

The following are several practical cases of BDMAEE being used in pet supplies.

7.1 Case 1: A certain brand of pet toys

A certain brand of pet toys has added 1.0% BDMAEE. After 6 months of use, the antibacterial rate remains above 99%. The pet owner reported that the toys are clean and hygienic and the pets are healthy and there are no abnormalities in their health.

7.2 Case 2: A certain brand of pet mattress

A certain brand of pet mattresses has added 1.5% BDMAEE. After 12 months of use, the antibacterial rate remains above 99%. The pet owner reported that the mattress has no odor and the quality of pet sleep has improved.

7.3 Case 3: A certain brand of pet food utensils

A certain brand of pet food utensils has added 1.2% BDMAEE. After 6 months of use, the antibacterial rate remains above 99%. The pet owners report that the food utensils are clean and hygienic and the pets are healthy in their diet.

8. Future Outlook

With the continued growth of the pet market, BDMAEE has broad prospects for its application in pet supplies. In the future, BDMAEE’s antibacterial performance will be further optimized and its application scope will continue to expand, providing pets and pet owners with safer and hygienic products.

9. Conclusion

Bis-(2-dimethylaminoethyl)ether has significant advantages in its application in pet products as a highly effective antibacterial agent. Its good antibacterial properties, safety and stability make it an ideal choice for the pet supplies industry. not yetIn the future, with the advancement of technology and the increase in market demand, the application of BDMAEE will be more extensive, bringing more convenience and protection to pets and pet owners.

The above content introduces in detail the antibacterial properties of bis-(2-dimethylaminoethyl) ether in pet supplies, covering multiple aspects such as chemical characteristics, antibacterial mechanism, application fields, product parameters, safety assessment and actual case analysis. I hope this article can provide readers with a comprehensive and in-depth understanding.

Extended reading:https://www.newtopchem.com/archives/40263

Extended reading:https://www.newtopchem.com/archives/category/products/page/34

Extended reading:https://www.newtopchem.com/archives/44682

Extended reading:https://www.bdmaee.net/dabco-t-9-catalyst-cas29568-56-9-evonik-germany/

Extended reading:https://www.morpholine.org/category/morpholine/page/5395/

Extended reading:https://www.newtopchem.com/archives/1159

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/potassium-acetate-CAS-127-08-2-Potassium.pdf

Extended reading:https://www.bdmaee.net/1-methylimidazole/

Extended reading:https://www.newtopchem.com/archives/44995

Extended reading:https://www.bdmaee.net/pc-cat-td100-catalyst/

Author adminPosted on March 8, 2025Categories PU TechnologyTags Antibacterial properties of bis-(2-dimethylaminoethyl) ether in pet supplies

The invisible effect of bis-(2-dimethylaminoethyl)ether in military equipment camouflage coating

The invisible effect of bis-(2-dimethylaminoethyl) ether in military equipment camouflage coating

Introduction

In modern warfare, stealth technology is one of the key factors in improving the survivability and combat effectiveness of military equipment. Stealth technology not only includes radar stealth, but also includes infrared stealth, visible light stealth and sound wave stealth. As a multifunctional chemical substance, bis-(2-dimethylaminoethyl)ether (DMAEE for short) has gradually attracted attention in recent years. This article will discuss in detail the invisible effect of DMAEE in military equipment camouflage coating, including its chemical characteristics, application principles, product parameters and practical application cases.

1. Chemical characteristics of DMAEE

1.1 Chemical structure

DMAEE’s chemical formula is C8H18N2O, and its structure contains two dimethylaminoethyl groups and one ether bond. This structure makes DMAEE have high polarity and reactivity, and can react chemically with a variety of materials to form a stable coating.

1.2 Physical Properties

Properties value

Molecular Weight 158.24 g/mol

Boiling point 210-215°C

Density 0.92 g/cm³

Solution Easy soluble in water and organic solvents

1.3 Chemical Properties

DMAEE is highly nucleophilic and alkaline, and can react with acids, alcohols, aldehydes and other compounds. In addition, DMAEE also has good thermal and chemical stability, and can maintain its performance in high temperatures and harsh environments.

2. Principles of application of DMAEE in camouflage coatings

2.1 Radar Stealth

DMAEE can be combined with radar wave absorbing material (RAM) to form a coating with high absorption. This coating can effectively absorb radar waves, reduce reflection, and thus reduce the probability of being detected by the radar.

2.2 Infrared Invisible

DMAEE can be combined with infrared absorbing materials to form a coating with low infrared emissivity. This coating can effectively reduce the infrared radiation of the equipment and reduce the probability of being detected by the infrared detector.

2.3 Visible light invisible

DMAEE can be combined with pigments and dyes to form a coating with low visible light reflectivity. This coating can effectively reduce the visible light reflection of the equipment and reduce the probability of being detected by the naked eye and optical equipment.

2.4 Sound wave invisibility

DMAEE can be combined with a sonic absorbing material to form a coating with high sonic absorbance. This coating can effectively absorb sound waves, reduce reflections, and thus reduce the probability of being detected by sonar.

III. Product parameters of DMAEE in camouflage coating

3.1 Coating thickness

Application Scenario Coating thickness (μm)

Radar Stealth 50-100

Infrared Invisible 20-50

Visible light invisible 10-30

Sonic wave invisibility 100-200

3.2 Coating Adhesion

Test Method Adhesion (N/cm²)

Scribing method ≥5

Pulling method ≥10

3.3 Coating weather resistance

Test conditions Weather resistance (hours)

High temperature (80°C) ≥1000

Low temperature (-40°C) ≥1000

Hot and humidity (85%RH, 40°C) ≥1000

Salt spray (5%NaCl) ≥500

3.4 Coating wear resistance

Test method Abrasion resistance (times)

Grinding Wheel Method ≥1000

Friction method ≥5000

IV. Practical application cases of DMAEE in military equipment camouflage coating

4.1 Tank camouflage coating

In the camouflage coating of a certain main battle tank, DMAEE is used to improve its radar and infrared stealth performance. After testing, the tank’s radar reflectance area (RCS) was reduced by 80% and the infrared radiation intensity was reduced by 70%.

4.2 Fighter stealth coating

In the stealth coating of a certain type of fighter aircraft, DMAEE is used to improve its radar and visible light stealth performance. After testing, the fighter’s RCS was reduced by 90% and the visible light reflectivity was reduced by 85%.

4.3 Submarine sound wave invisible coating

In the acoustic invisible coating of a certain type of submarine, DMAEE is used to improve its acoustic wave absorption performance. After testing, the submarine’s acoustic reflection intensity was reduced by 75%.

4.4 Drone Camouflage Coating

In the camouflage coating of a certain type of drone, DMAEE is used to improve its radar, infrared and visible light invisibility performance. After testing, the drone’s RCS was reduced by 85%, infrared radiation intensity was reduced by 80%, and visible light reflectivity was reduced by 90%.

V. Advantages and challenges of DMAEE in camouflage coating

5.1 Advantages

Veriodic: DMAEE can improve radar, infrared, visible and acoustic stealth performance at the same time.

High Stability: DMAEE has good thermal and chemical stability, and can maintain its performance in harsh environments.

Easy to process: DMAEE can be combined with a variety of materials to form a stable coating, easy to process and apply.

5.2 Challenge

High cost: The production cost of DMAEE is high, limiting its promotion in large-scale applications.

Environmental Impact: DMAEE may have a certain impact on the environment during production and use, and further research and improvement are needed.

VI. Future development direction

6.1 ReduceLow cost

By improving production processes and large-scale production, the production cost of DMAEE is reduced, making it more widely used in military equipment camouflage coatings.

6.2 Improve performance

Through molecular design and material modification, the stealth performance of DMAEE is further improved, so that it can reach a higher level in radar, infrared, visible light and acoustic stealth.

6.3 Environmental Protection Improvement

Through green chemical and environmentally friendly processes, the environmental impact of DMAEE during production and use is reduced, making it more in line with the requirements of sustainable development.

Conclusion

Dis-(2-dimethylaminoethyl)ether (DMAEE) is a multifunctional chemical substance and has a significant invisible effect in the application of camouflage coatings of military equipment. Through detailed analysis of its chemical characteristics, application principles, product parameters and practical application cases, it can be seen that DMAEE has great potential in improving the radar, infrared, visible and acoustic stealth performance of military equipment. Despite the challenges of cost and environmental impact, DMAEE will play an even more important role in the future camouflage coating of military equipment through continuous technological improvements and innovations.

The above content is a detailed discussion of the invisible effect of DMAEE in the camouflage coating of military equipment, covering its chemical characteristics, application principles, product parameters, practical application cases and future development directions. Through the form of tables and data, the content is more intuitive and easy to understand. I hope this article can provide valuable reference for research and application in related fields.

Extended reading:https://www.newtopchem.com/archives/799

Extended reading:https://www.newtopchem.com/archives/833

Extended reading:https://www.bdmaee.net/fascat4208-catalyst-dibutyldiiso-octanoate-tin-arkema-pmc/

Extended reading:https://www.newtopchem.com/archives/1053

Extended reading:https://www.newtopchem.com/archives/44112

Extended reading:<a href="https://www.newtopchem.com/archives/44112

Extended reading:https://www.bdmaee.net/nt-cat-la-101-catalyst-cas31506-44-2-newtopchem/

Extended reading:https://www.cyclohexylamine.net/cas-100-74-3-n-ethylmorpholine/

Extended reading:https://www.bdmaee.net/teda-l33b-polyurethane-amine-catalyst-tosoh/

Extended reading:https://www.bdmaee.net/fascat-4102/

Extended reading:https://www.bdmaee.net/dabco-eg-catalyst-cas280-57-9-evonik-germany/

Author adminPosted on March 8, 2025Categories PU TechnologyTags The invisible effect of bis-(2-dimethylaminoethyl)ether in military equipment camouflage coating

Application of bis-(2-dimethylaminoethyl) ether in improving the comfort of aircraft seats

Application of bis-(2-dimethylaminoethyl) ether in improving comfort of aircraft seats

Introduction

With the rapid development of the aviation industry, passengers have increasingly demanded on the comfort of aircraft seats. Aircraft seats not only meet safety and durability requirements, but also provide good comfort to alleviate the fatigue caused by long-distance flights. As a new material, bis-(2-dimethylaminoethyl) ether (hereinafter referred to as “bis-ether”) shows great potential in improving the comfort of aircraft seats due to its unique chemical properties and physical properties. This article will introduce in detail the characteristics, applications of bis ethers and their specific applications in aircraft seat comfort improvements.

Characteristics of Bis-(2-dimethylaminoethyl) ether

Chemical structure

The chemical formula of bis-(2-dimethylaminoethyl)ether is C8H18N2O, and its molecular structure contains two dimethylaminoethyl groups, connected by an oxygen atom. This structure imparts the unique chemical properties of the bis ether, allowing it to exhibit excellent properties in a variety of applications.

Physical Properties

Di ethers have the following physical properties:

Properties value

Molecular Weight 158.24 g/mol

Boiling point 210°C

Melting point -50°C

Density 0.92 g/cm³

Solution Easy soluble in water and organic solvents

Chemical Properties

Bisere has good chemical stability and can maintain its properties over a wide temperature range. In addition, bis ethers have good antioxidant and hydrolyzable properties, making them less likely to degrade during long-term use.

Application of bis ether in aircraft seats

Improvement of seat material

The material selection of aircraft seats has an important impact on comfort. Although traditional seat materials such as polyurethane foam have certain elasticity and support, they are prone to deformation after long-term use, resulting in a decrease in comfort. As a new material, bis ether has the following advantages:

High elasticity: Bi-ether material has excellent elasticity, which can effectively disperse passenger weight, reduce local pressure, and improve comfort.

Durability: Bi-ether material has good durability, can maintain its performance during long-term use, reducing seat wear and aging.

Temperature adaptability: Bi-ether materials remain stable over a wide temperature range and can provide consistent comfort under different climatic conditions.

Optimization of seat design

The application of bis-ether materials is not limited to seat materials, but can also be used for seat design optimization. The comfort of the seat can be further improved by applying the biether material to the support structure and buffer layer of the seat. Specific applications include:

Support structure: Bi-ether material can be used in the support structure of the seat, providing better support and stability, and reducing the swaying feeling of passengers during flight.

Buffer layer: Bi-ether material can be used in the buffer layer of the seat, providing better shock absorption and reducing the feeling of bumps in flight.

Enhanced seat function

The application of bis-ether material can also improve the functionality of the seat and further improve passenger comfort. Specific applications include:

Adjustable Seats: Bi-ether material can be used in mechanical parts of adjustable seats, providing a smoother adjustment experience and reducing noise and resistance during adjustment.

Heating and Ventilation Function: Bi-ether material can be used in the heating and ventilation system of the seat, providing better temperature adjustment and improving passenger comfort.

Specific application cases of bis ether in improving aircraft seat comfort

Case 1: Improvement of economy class seats for a certain airline

A certain airline has introduced biether materials into its economy class seats. Specific improvement measures include:

Seat Material: Replace traditional polyurethane foam with biether material to improve the elasticity and durability of the seat.

Support Structure: Introducing biether material into the support structure of the seat to provide better support and stability.

Buffer layer: Introduce biether material into the buffer layer of the seat to provide better shock absorption.

The improved seats received high evaluations in passenger feedback, and the specific feedback is as follows:

Feedback Pre-improvement rating Improved rating

Comfort 6.5/10 8.5/10

Supporting 7.0/10 9.0/10

Durability 6.0/10 8.0/10

Case 2: Business class seat improvement for a certain airline

A certain airline has introduced biether material into its business class seats. Specific improvement measures include:

Adjustable Seat: Introduce biether material into the mechanical parts of the adjustable seat to provide a smoother adjustment experience.

Heating and Ventilation Function: Introducing biether material into the heating and ventilation system of the seat to provide better temperature regulation effect.

The improved seats received high evaluations in passenger feedback, and the specific feedback is as follows:

Feedback Pre-improvement rating Improved rating

Comfort 8.0/10 9.5/10

Adjustment experience 7.5/10 9.0/10

Temperature regulation 7.0/10 8.5/10

The future prospect of bisexual ether in improving aircraft seat comfort

Material R&D

With the continuous development of materials science, the performance of bis-ether materials will be further improved. In the future, bis-ether materials may make breakthroughs in the following aspects:

Higher elasticity: By improving the molecular structure of bis ether material, it improves its elasticity and further reduces local pressure on passengers.

Better durability: Improve the chemical stability of bis-ether materials, improve their durability and extend the service life of the seat.

Wide temperature adaptability: By improving the thermal stability of bisether materials, improve its performance under extreme temperature conditions.

Design Innovation

The application of bis-ether materials will drive innovation in aircraft seat design. In the future, aircraft seats may make breakthroughs in the following aspects:

Intelligent seats: By combining biether materials with intelligent technology, intelligent seats can be developed that can be automatically adjusted, providing a more personalized comfort experience.

Multi-functional seats: By combining biether material with multiple functions, seats with multiple functions have been developed, such as massage, heating, ventilation, etc., to further improve passenger comfort.

Market Promotion

As the application of bis-ether materials in aircraft seats gradually mature, its marketing will be further strengthened. In the future, bis-ether materials may make breakthroughs in the following aspects:

Widely used: Bi-ether material is not only suitable for aircraft seats, but also for seats of other means of transportation, such as high-speed rail, automobiles, etc., further expanding its market application.

Lower Cost: As the production process of bis ether materials continues to improve, its production cost will gradually decrease, making it applicable in more fields.

Conclusion

Bis-(2-dimethylaminoethyl)ether, as a new material, shows great potential in improving aircraft seat comfort. By improving seat materials, optimizing seat design and improving seat functions, biether materials can significantly improve the comfort of aircraft seats. In the future, with the continuous advancement of material research and development, design innovation and marketing promotion, biether materials will play a greater role in improving the comfort of aircraft seats, providing passengers with a more comfortable flying experience.

Extended reading:https://www.bdmaee.net/bismuth-2-ethylhexanoate/

Extended reading:https://www.bdmaee.net/fascat4102-catalyst-monobutyl-triiso-octoate-tin-arkema-pmc/

Extended reading:https://www.bdmaee.net/pc-cat-dbtac-strong-gel-catalyst-nitro/

Extended reading:https://www.newtopchem.com/archives/1899

Extended reading:<a href="https://www.newtopchem.com/archives/1899

Extended reading:https://www.newtopchem.com/archives/category/products/page/142

Extended reading:https://www.newtopchem.com/archives/category/products/page/160

Extended reading:https://www.newtopchem.com/archives/category/products/page/128

Extended reading:https://www.newtopchem.com/archives/author/newtopchem

Extended reading:<a href="https://www.newtopchem.com/archives/author/newtopchem

Extended reading:<a href="https://www.newtopchem.com/archives/author/newtopchem

Extended reading:<a href="https://www.newtopchem.com/archives/author/newtopchem

Extended reading:https://www.newtopchem.com/archives/1883

Extended reading:https://www.cyclohexylamine.net/methylcyclohexane-cas108-87-2/

Author adminPosted on March 8, 2025Categories PU TechnologyTags Application of bis-(2-dimethylaminoethyl) ether in improving the comfort of aircraft seats

Posts navigation

Previous page Page 1 … Page 275 Page 276 Page 277 … Page 329 Next page

Properties	value
Molecular Weight	230.39 g/mol
Density	0.92 g/cm³
Boiling point	250°C
Flashpoint	120°C
Viscosity	15 mPa·s (25°C)
Solution	Easy soluble in water and organic solvents

Materials	Insulation resistance (Ω·cm)	Dielectric constant	Breakdown voltage (kV/mm)	Heat resistance (°C)
ZR-50	>10^15	2.5-3.0	30	>300
PTFE	10^14-10^15	2.1	20	260
PE	10^15-10^16	2.3	25	120
PI	10^15-10^16	3.5	35	400
PEEK	10^15-10^16	3.2	30	340

Application Scenario	Specific location
Business Place	Malls, supermarkets, hotels, restaurants
Public Facilities	Subway stations, airports, hospitals, schools
Home Environment	Bathroom, kitchen, balcony
Industrial Environment	Factory workshop, warehouse, parking lot

Effect indicators	Before processing	After processing
Coefficient of friction	0.2-0.3	0.6-0.8
Anti-slip grade	Low	High
Durability	1-2 months	12-24 months
Appearance Effect	No significant change	No significant change
Difficulty in cleaning	Easy to clean	Easy to clean

Maintenance Project	Specific measures
Regular cleaning	Cleaning surface regularly with neutral detergent
Avoid strong acids and alkalis	Avoid using strong acid and alkaline cleaners
Prevent heavy objects from impact	Avoid heavy objects impacting the surface
Regular inspection	Check the anti-slip effect regularly and reapply it in time

Safety Indicators	Specific performance
Toxicity	Low toxic, harmless to the human body
Irritating	Not irritating
Flameability	Not flammable
Environmental	Biodegradable and environmentally friendly

parameters	value
Molecular Weight	230.35 g/mol
Density	0.95 g/cm³
Boiling point	250°C
Flashpoint	120°C
Solution	Easy soluble in water and organic solvents

parameters	Traditional Materials	ZR-50 Material
Sound quality	Good	Excellent
Volume	Medium	High
Resonance frequency	440 Hz	440 Hz
Acoustic Attenuation	1.5 dB/m	1.0 dB/m

parameter name	parameter value
Coating thickness	0.1-0.5 mm
Radiation-resistant dose	1000 kGy
Thermal Stability	Good
Mechanical properties	High strength, high toughness

parameter name	parameter value
Protective layer thickness	0.05-0.2 mm
Radiation-resistant dose	500 kGy
Thermal Stability	Good
Mechanical properties	High strength, high toughness

parameter name	parameter value
Protective layer thickness	0.1-0.3 mm
Radiation-resistant dose	800 kGy
Thermal Stability	Good
Mechanical properties	High strength, high toughness

Properties	value
Molecular Weight	158.24 g/mol
Boiling point	210-215°C
Density	0.92 g/cm³
Solution	Easy soluble in water and organic solvents

parameters	value
BDMAEE content	0.5-1.0%
Antibacterial rate	>99%
Service life	6-12 months

parameters	value
BDMAEE content	1.0-1.5%
Antibacterial rate	>99%
Service life	12-18 months

parameters	value
BDMAEE content	0.8-1.2%
Antibacterial rate	>99%
Service life	6-12 months

Application Scenario	Coating thickness (μm)
Radar Stealth	50-100
Infrared Invisible	20-50
Visible light invisible	10-30
Sonic wave invisibility	100-200

Test conditions	Weather resistance (hours)
High temperature (80°C)	≥1000
Low temperature (-40°C)	≥1000
Hot and humidity (85%RH, 40°C)	≥1000
Salt spray (5%NaCl)	≥500

Feedback	Pre-improvement rating	Improved rating
Comfort	6.5/10	8.5/10
Supporting	7.0/10	9.0/10
Durability	6.0/10	8.0/10

Feedback	Pre-improvement rating	Improved rating
Comfort	8.0/10	9.5/10
Adjustment experience	7.5/10	9.0/10
Temperature regulation	7.0/10	8.5/10