HDI Low Viscosity AsahiKasei  TUL-100

HDI Low Viscosity AsahiKasei  TUL-100

 

ABOUT:

Product Class: Isocyanate

DURANATE TUL-100 by Asahi Kasei is hexamethylene diisocyanate (HDI) trimer with extra-low viscosity and high NCO content. Acts as a curing agent for urethanes. Exhibits excellent weatherability, good chemical & abrasion resistance, good compatibility and drying properties. Shows excellent color retention and outstanding performance. DURANATE TUL-100 is suitable for automotive, architectural, industrial, consumer electronic and information technology Possible applications could be gravure, offset and screen inks.

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Low Viscosity AsahiKasei  TLA-100

HDI Low Viscosity AsahiKasei  TLA-100

 

Type

Aliphatic polyisocyanate based on hexamethylene diisocyanate.

Features

# High NCO content

# Low viscosity

# Excellent weather resistance

# Excellent Compatibility

# Good coating film appearance

Applications

# Two-component applications

# Automotive OEM coatings

# Automotive refinishes

# Plastic coatings

Typical properties

Appearance

Colorless to slightly yellowish clear liquid

Non-volatile

100 wt%

Solvent

None

NCO content

23.5 wt%

Viscosity

500 mPa·s at 25’C

Color value

< 1 (Gardner)

NCO equivalent weight

Approx.180

 

These values provide general information and are not part of the productspecifications.

 

Comparison with Conventional Trimer

TLA-100

Conv Trimer

Viscosity mPa * s/25℃

 500

2,700

NCO content %

 23.5

21.7

Functionality

3.0

3.4

HDI conc. After 50℃ . 1 month

 Low

 Low

Weather resistance of cured film

Excellent

Excellent

Hardness of cured film

High

High

 

 

Compatibility with polyols

Mixing ratio of DURANATETM TLA-100 with polyols is based on NCO/OH equivalentratio of 1/1 .

 

 

Development of gel fraction & hardness

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne Covesro XP2655

HDI Waterborne Covesro XP2655

ABOUT:

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).Hardener for waterborne two-component polyurethane systems.

Product Types

  • HDI

  • PIC

  • Hydrophilic polyisocyanate

  • Aliphatic polyisocyanate

  • Crosslinkers

  • Polyisocyanate

  • Hardeners

  • Polyisocyanurate

  • Isocyanate

  • Reactive system

Material:

Coatings, paints & inks:Fast curing, Weather resistant, Easy mixing, Waterborne

Adhesives:Moisture resistant, Fast bonding, Waterborne, Heat activated

General Characterization:

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

Hardener for waterborne two-component polyurethane systems.

 

Logistics and Handling

Storage Conditions:

– Storage in original sealed Covestro container.

– Recommended storage temperature: 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.

Sampling:

No data available

Technical Properties & Datasheets

Characteristics:

Property Name

Test Method

Unit

Value

Flash point

DIN EN ISO 2719

°C

approx. 192

Density

DIN EN 2811

g/cm3

approx. 1.16

 

 

Specifications:

Property Name

Test Method

Unit

Value

Viscosity at 23 °C

M014-ISO 3219/A.3

mPa*s

3,500 ± 1,000

NCO content

M105-ISO 11909

%

20.3 – 21.3

Hazen color value

M017-EN 1557

< 60

Monomeric HDI

M106-ISO 10283

%

≤ 0.24

 

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne Covesro  XP2547

HDI Waterborne Covesro  XP2547

 

ABOUT:

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Hardener for waterborne two-component polyurethanecoatings.

Product Types

No data available

Material

No data available

General Characterization

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

Hardener for waterborne two-component polyurethane coatings.

 

Logistics and Handling

Storage Conditions

– Storage in original sealed Covestro container.

– Recommended storage temperature: 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The accessof water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead todangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.

Sampling

No data available

Technical Properties & Datasheets

Characteristics

Property Name

Test Method

Unit

Value

Density at 20 °C

DIN EN ISO 2811

g/ml

approx. 1.15

Flash point

DIN EN 22 719

°C

approx. 185

 

Specifications:

Property Name

Test Method

Unit

Value

Hazen color value

M017-EN 1557

≤ 150

Monomeric HDI

M016-ISO 10283

%

< 0.26

NCO content

M105-ISO 11909

%

22.5 ± 0.5

Viscosity at 23 °C

M014-ISO 3219/A.3

mPa*s

570 – 730

 

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne Covesro 305

HDI Waterborne Covesro 305

 

ABOUT:

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).As a hardener for aqueous two-component polyurethane systems.

Product Types

Hydrophilic polyisocyanate

Material

No data available

General Characterization

Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

As a hardener for aqueous two-component polyurethane systems.

 

Logistics and Handling

Storage Conditions

– Storage in original sealed Covestro container.

– Recommended storage temperature: 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The accessof water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead todangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity.

Sampling

No data available

Technical Properties & Datasheets

Characteristics

Property Name

Test Method

Unit

Value

Density

DIN 53 217

g/cm3

approx. 1.16

Equivalent weight

approx. 260

Flash point

DIN EN 53 213

°C

approx. 230

 

Specifications:

Property Name

Test Method

Unit

Value

Hazen color value

DIN EN 1557

≤ 150

NCO content

DIN EN ISO 11 909

%

16.2 ± 0,4

Monomeric HDI content

DIN EN ISO 10 283

% by wt.

< 0.15

Viscosity at 23 °C

DIN EN ISO 3219/A.3

mPa*s

6,500 ± 1,500

 

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

 

HDI Waterborne Covesro 304

HDI Waterborne Covesro 304

 

ABOUT:

Hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). As the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems.

Product Types

  • HDI

  • PIC

  • Hydrophilic polyisocyanate

  • Aliphatic polyisocyanate

  • Crosslinkers

  • Polyisocyanate

  • Hardeners

  • Polyisocyanurate

  • Isocyanate

  • Reactive system

Material

Coatings, paints & inks:High functional, Weather resistant, Easy mixing, Ultra-low monomer, Waterborne

Adhesives:Moisture resistant, Ultra-low monomer, Waterborne, Heat activated

General Characterization

Hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

As the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems.

With respect to its composition, the product corresponds to the following sections of the U.S. FDA’s guidelines Title 21 CFR: Section 175.105 “Adhesives”.

Storage Conditions

– Storage in original sealed Covestro container.

– Recommended storage temperature: 0 – 30 °C.

– Protect from moisture, heat and foreign material.

General information: Hydrophilic isocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The containers must always be kept tightly closed. The access of water in all forms (moist air, solvents, moist containers) must be prevented, because the generation of carbon dioxide can lead to dangerous increases in pressure. Storage at higher temperatures will result in increase of color and viscosity. Due to the raw materials, the product may show visible turbidity caused by the cold. This turbidity occurs at approx. + 5 °C and is reversible when heated to room temperature. The product properties are not affected.

Sampling

No data available

Technical Properties & Datasheets

Characteristics:

Property Name

Test Method

Unit

Value

Flash point

DIN EN 22719

°C

226

Equivalent weight

approx. 230

Density

DIN 51757

g/ml

approx. 1.16

Specifications

Property Name

Test Method

Unit

Value

NCO content

M105-ISO 11909

%

18.2 ± 0.5

Color value (Hazen)

M017-EN 1557

≤ 60

Viscosity at 23 °C

M014-ISO 3219/A.3

mPa*s

4,000 ± 1,500

Monomeric HDI

M106-ISO 10283

< 0.10

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne  DIC  5500  

HDI Waterborne  DIC  5500

 

ABOUT:

The product data shown here are not sales specifications. When you import/use the product, you need to confirm whether the regulations of the country/region are applicable or not. Please refer to SDS concerning safety and handling of the product.

Description

Water dispersible polyisocyanate hardener.

Applications

Industrial coatings.

Protective coatings.

Wood coatings.

Hardener for 2K waterborne polyurethane coatings.

Key features

Dispersibility in water.

Stability in water.

Compatible with main resins.

Characteristics

Solvent

Methoxypropyl acetate

Solids content, %

79.0 – 81.0

Viscosity, Gardner

G – M

Acid value on solution, mgKOH/g

OH value on solution, mgKOH/g

13.0 – 14.0 (NCO content, %)

EEW, g/eq

pH

Color, Gardner

 

Storage and Transportation:

STORAGE: It is recommended to store in a dry and cool area with proper ventilation.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne WanHua 278

HDI Waterborne WanHua 278

 

Product Description

Aquolin 278 is a water dispersible polyisocyanate based on hexamethylene diisocyanate(HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings. Thanks to its low viscosity and ease of handmixing, Aquolin 278 can be used to prepare “solvent-free hardener” in order to produce ultralow VOC coatings. After addition of Aquolin 278, the ready-to-use mixture must be used within the pot life.

Properties

  • Matting effect.

  • Excellent water dispersibility.

  • Excellent weather resistance.

Characteristic data*

Property

Value

Unit

Method

Appearance

Colorless to yellowish transparent liquid

NCO content

22.5±0.5

%

GB/T 12009.4-2016

Viscosity

1500-3500

mPa·s

Brookfield LV, 63#/3rpm,25°C

Color APHA

<80

GB/T 1722-1992

Monomeric

isocyanate

≤ 0.2

%

GB/T 18446-2009

Flash point

~196

°C

GB/T 5208

Density

~1.16

g/cm3

GB/T 4472-2011

*These properties are typical but do not constitute specifications.

Storage

The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up oncethe package is open.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne WanHua 270

HDI Waterborne WanHua 270

 

Product Description

Aquolin 270 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. After addition of Aquolin 270, the ready-to-use mixture must be used within the pot life.

Aquolin 270 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.

Properties

  1. High gloss and high building up.

  2. Excellent weather resistance.

  3. Excellent water dispersible and hand-mixing.

Characteristic data*

Property

Value

Unit

Method

Appearance

Colorless to yellowish transparent liquid

NCO content

21.5±0.5

%

GB/T 12009.4-2016

Viscosity

1500-3500

mPa·s

Brookfield LV, 63#/3rpm,25°C

Color APHA

<80

GB/T 1722-1992

Monomeric

isocyanate

≤ 0.2

%

GB/T 18446-2009

Flash point

~196

°C

GB/T 5208

Density

~1.16

g/cm3

GB/T 4472-2011

*These properties are typical but do not constitute specifications.

Storage

The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up oncethe package is open.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]

HDI Waterborne WanHua 269

HDI Waterborne WanHua 269

 

Product Description

Aquolin 269 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. After addition of Aquolin 269, the ready-to-use mixture must be used within the pot life.

Properties

  1. High gloss and high building up.

  2. Excellent water resistance.

  3. Excellent water dispersible and hand-mixing.

  4. Excellent weather resistance.

Characteristic data*

Property

Value

Unit

Method

Appearance

Colorless to yellowish transparent liquid

NCO content

18.8-19.8

%

GB/T 12009.4-2016

Viscosity

500-2000

mPa·s

Brookfield LV, 63#/3rpm,25°C

Color APHA

<80

GB/T 1722-1992

Monomeric

isocyanate

≤ 0.2

%

GB/T 18446-2009

Flash point

~128

°C

GB/T 5208

Density

~1.13

g/cm3

GB/T 4472-2011

*PThese properties are typical but do not constitute specifications.

Storage

The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.

Packaging:

200KG/drum Please fasten the packaging cover as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the performance of the product. Do not inhale dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene practices.

E_mail us [email protected]